Wednesday, June 19, 2013
By Ray Routhier email@example.com
AUBURN — To me, the dining chair looked done.
George Colby Jr., right, a cabinetmaker at Thos. Moser Cabinetmakers in Auburn, shows Ray Routhier how to sand the back of a chair.
John Patriquin /Staff Photographer
Cabinetmaker George Colby Jr., left, shows reporter Ray Routhier how to sand a chair at Thos. Moser Cabinetmakers. It takes nine to 10 hours to make a chair.
John Patriquin /Staff Photographer
ABOUT THIS SERIES
MAINE AT WORK takes an interactive look at iconic, visible or just plain interesting jobs done by folks in Maine. Reporter Ray Routhier shadows a worker or workers, reports what he sees and tries his hand at some of the job's duties.
IF YOU'D LIKE to suggest a job to be explored in this feature, e-mail firstname.lastname@example.org or call 791-6454.
THIS WEEK'S JOB
TITLE: Cabinetmaker, Thos. Moser Cabinetmakers, Auburn.
WORKER: George Colby Jr., 30, of New Gloucester.
HOURS: 7 a.m. to 4 p.m., four days a week now. (Can increase with workload.)
DUTIES: Making furniture by hand, including cutting, gluing, sanding, grinding and even sculpting until the piece is done. Colby is also safety coordinator for the shop, making sure workers take steps to prevent accidents, injuries and health hazards such as breathing in wood dust.
SALARY: $11 to $18 an hour.
SURPRISING FACTS: It takes nine to 10 hours for a cabinetmaker to craft one of Moser's Pasadena arm chairs ($2,500), not including the rough cuts of wood or applying the finish. Most injuries among cabinetmakers are caused not by tools but by repetitive stress.
PERKS: $100 annual tool allowance, so workers can buy their own hand tools. Monthly project time, when workers can use Thos. Moser equipment for personal projects. Free scrap wood for employees for use as kindling or for small projects at home.
It wasn't stained or finished, but other than that it was fully assembled – arms, back, legs, seat. I would have been happy to take it home.
But cabinetmaker George Colby Jr., an 11-year veteran of making furniture at Thos. Moser Cabinetmakers in Auburn, told me it would take another three hours or so of hand labor before the chair could go off to the finishing room.
"See how rough that seat feels?" asked Colby, 30, as he motioned for me to run my fingers over the wood. Felt pretty smooth to my untrained fingers. "That's very rough; we have to work on that."
Colby took a couple of passes over the wooden seat with an air grinder – a loud, spinning disc that power-sands wood with only the slightest amount of pressure – then gave the tool to me.
He told me to smooth out the roughness while keeping the rounded parts of the seat round and the flat parts flat. I think I got a little mixed up, because with just a tiny shift of my hands, I was suddenly making the flat part a little rounded.
"Oh, you want to maintain the flat surface. We don't want it to look beveled on the edge," said Colby.
He quickly took the grinder back. "That's OK. It'll take a little extra work, but we can fix that."
I felt bad. I didn't want to add time to a project that Colby had said would take him about nine to 10 hours. From the time he gets the rough-cut wood to the time the chair is ready to have a finish applied, that's how long Colby and other cabinetmakers (the Moser company title for furniture makers) are supposed to spend on this particular chair.
I also felt bad later, when I read in the Moser catalog that the Pasadena dining chair I had worked on with Colby retails for $2,500. No wonder it takes nine hours or more to make one.
Colby told me how he does sanding, grinding and "sculpting" of the chairs with power tools and hand tools, including chisels and mallets he made himself. After the chairs are assembled, there are little lines and globs of glue to be sanded or ground away.
There is also a lot of shaping of the wood, which has to be done in tiny increments. The Pasadena chair in particular is full of curves and interesting angles that can't be attained by simply nailing straight pieces of wood together.
"When it leaves me to go to finishing, it's got to be completely ready – no dents, scratches, marks or defects of any kind," Colby said.
FROM APPRENTICE TO EMPLOYEE
Founded by former Bates College professor Tom Moser in 1972, Thos. Moser Cabinetmakers is known around the country. Its furniture is sold by catalog nationwide, and the company has showrooms in Freeport, Boston, New York City, Washington, D.C., Chicago, Los Angeles and San Francisco.
Colby has never wanted to do anything but woodworking. Luckily for him, he grew up in New Gloucester, right next to Auburn. In high school, Colby struggled, and to earn needed credits he took a woodworking class and became hooked.
He came to Thos. Moser as a teenager and was hired to do entry-level work. He eventually got into the company's apprentice cabinetmaker program and spent more than four years learning the craft.
"Woodworking is really all I've ever wanted to do, and I'm so lucky to have had this chance," he said.
Although about 65 people are making furniture at any one time at Thos. Moser, the workers are spread out. Most of the time I was with Colby in the chair area, there were only a half-dozen or so other workers visible, though many people passed through the area on their way to somewhere else.
(Continued on page 2)