January 4, 2011

Expert: Most ski lifts at Sugarloaf flawed

Crews shouldn't have tried to restart lift after seeing cable misalignment, he says

By J. Hemmerdinger jhemmerdinger@pressherald.com
Staff Writer

PORTLAND -- In the wake of a cable derailment at Sugarloaf ski resort this week, a ski safety expert who reviewed the last two years of state inspection reports on the resort's chairlifts said he was surprised at the number of problems the documents highlighted.

EQUIPMENT'S AGE

Skiing safety expert Penniman said many of the issues noted in the last two state inspection reports of Sugarloaf's lifts are indicative of older equipment.

He pointed specifically to metal fatigue, corrosion and electrical problems -- "classic old-lift stuff," he said.

He said some of the issues might be expected to turn up in the fall, when the state inspections were done, because lifts might get less attention during the summer; and mice, gophers or other small animals can wreak havoc on wiring.

He added that old lifts are like old cars, in that they tend to develop more problems during the winter, even if they recently passed inspections.

Sugarloaf spokesman Ethan Austin said Sugarloaf's maintenance department is busy all year.

"We have a very skilled lift maintenance staff employed year-round, and they spend the entire summer maintaining and upgrading lifts."

 

SKI LIFT MANUFACTURER HISTORY

The Spillway East chair lift was manufactured by Borvig Ski Lifts and installed in 1975.

The manufacturer made lifts from 1962 to 1991 and closed in 1993.

In 1996, Hagen Schulz, son of Borvig Ski Lifts founder Gary Schulz, founded Partek Ski Lifts. Schulz used a lot of Borvig's designs when first starting Partek. The New York-based company installed 24 lifts in North America before the company was purchased, along with all of Borvig's lift patents, by Austrian ropeway manufacturer Doppelmayr CTEC in 2005.

As of December 2009, Doppelmayr/Garaventa Group has designed and implemented more than 14,100 installations worldwide. The company is a world leader in the ropeway sector. Doppelmayr USA, Inc. is based in Salt Lake City.

Sugarloaf now works with Par-Tech, a company based in New York, on matters involving Spillway East.

Sources: www.skilifts.org, www.doppelmayr.com, Sugarloaf

He also questioned the wisdom of re-starting the lift with skiers aboard once the cable began tracking outside the guidance system.

"There is a lot of stuff here, a lot of things that (the inspector) has keyed in on. It doesn't look like a healthy lift maintenance (program). There is something wrong with nearly every lift," Richard Penniman of Truckee, Calif., said of the inspection reports by the Maine Board of Elevator and Tramway Safety.

Penniman has been assistant operations manager and mountain manager at ski resorts and has trained staff on lift operations. He also taught ski area operations and safety at Sierra College in Truckee. He has testified as a paid expert witness on ski accidents and lift operations in hundreds of court cases and depositions.

However, a spokesman for Sugarloaf Mountain said all of the problems mentioned in the most recent inspection were routine maintenance issues.

"All of our lifts, before they are opened, are licensed and inspected by the state; and are deemed safe to operate," spokesman Ethan Austin said.

No problems involving Spillway East, the lift that derailed, were noted in the reports.

Among the problems listed that Penniman highlighted were a faulty part on an emergency brake, broken stop switches and problems with the sheaves (the wheels atop the tower that support the cables).

"That is big stuff," Penniman said. "You should have your ducks in a row. There are a lot of significant things that need attention."

On Tuesday morning, the 35-year-old Spillway East derailed as two lift mechanics were trying to fix a misaligned cable. After two unsuccessful attempts to realign the cable, they decided to shut down the lift. As they slowly restarted the lift to offload passengers, the cable derailed. Sugarloaf employees and emergency response workers spent the next two hours assisting skiers who were injured in the fall, and using a rope-and-pulley system to remove skiers who were stranded on the lift. The lift had been carrying about 150 people.

As for the decision to restart the lift, Penniman said such a move should be made only if the misalignment is minimal.

"It can be slightly misaligned, but it can't be grossly misaligned, when it is touching the metal and off to one side. That is not good," he said.

Austin agreed -- the degree of misalignment determines the safety of running the lift.

"It is common practice at Sugarloaf and throughout the ski industry to run the lift at a slow speed when there is a slight misalignment, in order to run passengers off of the lift. When this happens, lift technicians work in tandem, with one operating the lift and the other on top of the tower to monitor the misalignment," he said.

According to the Sugarloaf news release, the cable was "observed to be running toward the outside of the rubber liners" of the sheave train.

The cable was "not running straight, dead center down the middle," Austin said.

Penniman said the lift cable, which is 1 3/8 inches in diameter, is supposed to run through a depression in a rubber liner inside the sheaves. A misalignment happens when the cable runs outside the center of the depression.

In cases of misalignments, ski resorts can unload passengers by running the lift slowly, or stop the lift and lower skiers by rope.

(Continued on page 2)

Were you interviewed for this story? If so, please fill out our accuracy form

Send question/comment to the editors




Further Discussion

Here at PressHerald.com we value our readers and are committed to growing our community by encouraging you to add to the discussion. To ensure conscientious dialogue we have implemented a strict no-bullying policy. To participate, you must follow our Terms of Use.

Questions about the article? Add them below and we’ll try to answer them or do a follow-up post as soon as we can. Technical problems? Email them to us with an exact description of the problem. Make sure to include:
  • Type of computer or mobile device your are using
  • Exact operating system and browser you are viewing the site on (TIP: You can easily determine your operating system here.)