August 25, 2013

Vacuuming ins and outs

We bring you the best methods and machines to tackle the chore.

By KIM COOK The Associated Press

Housekeeping, drudgery? Not to us members of the unofficial "clean club."

click image to enlarge

Got pets? Then you’ve got even more vacuuming challenges “fur” sure. That’s where crevice tools and upholstery nozzles really come in handy.

Shutterstock.com photos

click image to enlarge

You know if you belong: You enthusiastically discuss your favorite cleaning tools, staying loyal to equipment and techniques that have served you well over the years. You understand the difference between a crevice tool and an upholstery nozzle. Vacuuming? You see it as an art.

But what if you don't love to clean? Well, chances are you still need to suck it up. Here are some tips on methods and machines to help make the chore of vacuuming less of a challenge:

VACUUMING HOW-TO

Kit Selzer, senior editor at Better Homes & Gardens magazine, says you shouldn't begin cleaning by vacuuming.

"Vacuum after you've dusted. Pick up every possible thing from the floor, and move dining chairs and side tables out of the way so you have as much open space as possible," she says.

Professional house cleaners call this "top down cleaning" -- you start at the top of the room, so particulates settle. Tackle ceiling corners, window treatments, furniture and finally the floors.

Selzer also suggests keeping the attachments -- crevice tools and small brushes -- handy as you get started.

"They're invaluable for getting dust, dirt and pet hair while you already have the vacuum out. Use the crevice tool in corners and along the baseboards, the upholstery brush on anything made of fabric, and the dusting brush on blinds, books and lampshades," she advises.

How often should you vacuum? Frequently, especially in high-traffic areas. It keeps dirt from getting ground in and keeps carpet fibers from getting matted. Selzer says vacuuming once a week is good for the average carpet.

Other tips:

Small rugs act like mini mops, gathering up a lot of debris. Take them outdoors if possible for a good shake before vacuuming. If you can't do that, vacuum the rug thoroughly on both sides, roll it up and put it aside until the floor's been dealt with.

For big rugs, the Dalton, Ga.,-based Carpet and Rug Institute recommends slow, overlapping motions front to back. Start from the center of the rug and move out to the edges to prevent fraying. Don't go over one spot too many times; make three or four passes. Shaw Floors, makers of carpet, wood, tile and laminate flooring, has advice on its website, www.shawfloors.com: Use a rotating brush or comb beater brush attachment to agitate and loosen deep dirt. But thick wool pile rugs, shags and cabled weaves can get fuzzy or tangled with this brush, so stick to the suction-only attachment for them.

Change the direction of your vacuum passes frequently.

For bare floors, use a good, soft brush to protect the floor. Brushes will harden over time so need to be replaced.

Replace your machine when it no longer sucks like it used to. But make sure it's not just suffering from a clogged hose, filter or intake. Resist the fun of slurping up coins or small objects, as they can jam up the hose or, worse, the motor.

Empty the canister or vacuum bag when it's half- to three-quarters full; don't wait until it's stuffed. By then, you haven't been sucking up anything, just dispersing dirt by moving the vacuum around.

Got pets? Use crevice tools and upholstery nozzles to remove hair from tiny corners and baseboards as well as furniture. Vacuum throw pillows, mattresses and curtains weekly, to remove pet dander and fur.

CHOOSE YOUR WEAPON

There are two camps when it comes to regular vacuum models: uprights and canisters.

Canister fans tout the tote-ability of a lightweight machine that can be easily carried up stairs and maneuvered from room to room, and has a wand that gets under furniture. Upright lovers prefer to push than pull; these models tend to glide easily across floors and carpeting, and the dirt receptacle generally has a larger capacity than can vacs.

(Continued on page 2)

Were you interviewed for this story? If so, please fill out our accuracy form

Send question/comment to the editors




Further Discussion

Here at PressHerald.com we value our readers and are committed to growing our community by encouraging you to add to the discussion. To ensure conscientious dialogue we have implemented a strict no-bullying policy. To participate, you must follow our Terms of Use.

Questions about the article? Add them below and we’ll try to answer them or do a follow-up post as soon as we can. Technical problems? Email them to us with an exact description of the problem. Make sure to include:
  • Type of computer or mobile device your are using
  • Exact operating system and browser you are viewing the site on (TIP: You can easily determine your operating system here.)