August 20, 2013

Maine man building high-tech Iron Man costume

Thomas Lemieux of Oakland spent more than $2,000 and 400 hours building the elaborate costume in his basement.

By Matt Hongoltz-Hetling mhhetling@centralmaine.com
Staff Writer

(Continued from page 1)

click image to enlarge

Thomas Lemieux works on an arc reactor to go on his life-size Iron Man costume, in the basement of his Oakland home recently. Lemieux, 28, said he plans to wear the costume at the Hawthorne Hotel's Halloween Ball on Oct. 26 in Salem, Mass.

Photo by Jeff Pouland

click image to enlarge

Thomas Lemieux flexes his forearm, attached with an electrode, to activate a bionic repulsor, while working on his life-size Iron Man costume in the basement of his Oakland home recently.

Photo by Jeff Pouland

Additional Photos Below

INSIDE IRON MAN

The basic design for Thomas Lemieux's Iron Man suit was taken from a papercraft model he found on Internet sites devoted to making costumes.

He printed each of the estimated 1,000 pieces onto cardstock, which he used to make stencils. The stencils were used to trace the pieces onto sheets of foam, which he then cut out with a surgical scalpel. Each piece was covered with eight layers of a spray-on adhesive, and then treated with three layers of a plastic coating meant for use on tool handles. He assembled the larger pieces, such as the helmet, by taping them together into a cohesive unit and then sealing them together with glue. The various units are then held on the wearer's body using straps and buckles.

He plans to sand the surface, coat it multiple times with car paint — sunburst yellow, inferno red, and gunmetal gray — before finishing it with a coat of gloss.

Lemieux built the electronics from scratch, using circuit boards and other items he purchased from Radioshack and specialty online stores. The electronics, cased in Altoids mint tins, will be housed in cavities within the suit, and will be powered on and off by four toggle switches Lemieux plans to install near his shoulders.

Other materials he has used to build the suit include guitar strings to hold the various pieces of the gauntlets together, contact paper commonly used to line shelves, a push-button click light, SD cards of the type commonly found in cameras, AV cables, circuit boards and servo motors.

Underneath the armor, Lemieux will wear color-coded tights, gloves, and a shirt, as well as a cold vest, which is stored in a freezer and keeps the wearer cool for four hours.

Last year, the two largest Maker Faire events, held in San Francisco and New York, drew a combined 165,000 people.

Makers appear frequently in a vibrant network of websites, the biggest of which, called Boing Boing, ranks as one of the most popular blogs in the world with 3.5 million unique visitors each month.

In Maine, a group of about 50 people, including Sisco and Lemieux, have come together in an online forum to advocate for the founding of a local "makerspace," essentially a community workshop. Sisco said Waterville is an ideal location for such a space, because of its easy access to Interstate 95.

Right now, even without a makerspace, Sisco and other group members are engrossed in their own projects, which include a large stained-glass moth, an etching machine, two wheelchair-based robots and a remote-controlled "quadcopter," with self-stabilization capabilities and a built-in GPS system.

Sisco himself is building one of the robots, which he said he will connect to a lawnmower and a navigation system that will allow it to mow his lawn, among other things.

A makerspace would help group members to pool both resources and inspiration, Sisco said. For example, Sisco could house his welder there for use by other makers, while he could use their tools for his own projects.

In months of online discussions, the idea has attracted a lot of support, but little in the way of concrete plans.

"We're in that stage where we're getting ready to get off our butt and do something," Sisco said.

The transformation

Sisco said Maine's maker community is lagging behind those in other states, but that it has been growing steadily over the past three years. In September, Maine will host two Mini Maker Faires of its own.

The first, at the Camden Public Library on Sept. 7, will feature underwater robots that can be built for $60, a bicycle-powered ice cream maker, and space suit gloves, among other projects. Organizers of the second event at the Museum L-A in Lewiston-Auburn, have not yet released a list of the 20 scheduled participants. But at last year's inaugural event, 17 makers from around the state showed off things including a robotic basketball game, self-inflating puppets, and a hand-made windmill.

The difference between makers and old-school putterers can mostly be chalked up to the Internet, which has made it easier for people to share designs and feed each other's creative fires.

In his quest to build Iron Man, Lemieux said he's interacted with hundreds of people online to gather and share information, including posting questions in forums, watching online tutorials, and scanning hundreds of other projects for ideas.

As he builds, he improvises when he wants to, adding his own little twists that might be seen as improvements and emulated by others doing similar projects.

His experience demonstrates another central tenet of the maker community.

While makers transform raw materials into finished projects, they themselves are transformed into more capable problem-solvers by the experience of making.

For Lemieux, his whole vocabulary has been upgraded as a result of his desire to bring a superhero to life.

"I didn't know a whole lot about voltage regulators and capacitors, resistor codes," he said. "But I did my homework, so to speak."

The big project had a small beginning. Lemieux first set out to build a replica of Iron Man's arc reactor. When researching that project online, he was exposed to the range of possibilities, which inspired him to upgrade his plans.

Iron Man of Maine

Lemieux said he has a couple of dates planned to show off his Iron Man suit, but he's not sure what its long-term future will be.

In late October, he hopes to take first place in a costume ball at the Hawthorne Hotel in Salem, Mass., part of a wider downtown Halloween celebration that includes a psychic convention in a strip mall.

In early November, he will suit up at the booth of a friend at a gaming convention in the Augusta Civic Center.

And next July, he hopes to make an appearance at Comic-Con, a large comic book-themed annual convention in San Diego.

But by then, he will likely be focused on his next project.

Lemieux has another thing in common with the fictional Tony Stark. One of the biggest mistakes of Stark's career was the creation of Ultron, a robot of fearsome intelligence that dedicated itself to wiping out all biological organisms, Terminator-style.

Building a costume of Ultron, who will be featured as the primary villain of the next superhero "Avengers" movie due out in 2015, might also be Lemieux's next project.

Unlike Stark, however, Lemieux can be fairly certain that his creation will not turn on humanity, but will instead advance Maine's maker community.

Matt Hongoltz-Hetling — 861-9287
mhhetling@centralmaine.com

Were you interviewed for this story? If so, please fill out our accuracy form

Send question/comment to the editors


Additional Photos

click image to enlarge

Thomas Lemieux tests a bionic repulsor, which activates the hands on his life-size Iron Man costume, in the basement of his Oakland home recently.

Photo by Jeff Pouland

click image to enlarge

A hand with a bionic repulsor lights up in Thomas Lemieux's workshop, in the basement of his Oakland home, recently.

Photo by Jeff Pouland

click image to enlarge

Thomas Lemieux works on a voice changer for his life-size Iron Man costume, in the basement of his Oakland home, recently.

Photo by Jeff Pouland

click image to enlarge

Materials for Thomas Lemieux's life-size Iron Man costume, in the basement of his Oakland home recently.

Photo by Jeff Pouland

  


Further Discussion

Here at PressHerald.com we value our readers and are committed to growing our community by encouraging you to add to the discussion. To ensure conscientious dialogue we have implemented a strict no-bullying policy. To participate, you must follow our Terms of Use.

Questions about the article? Add them below and we’ll try to answer them or do a follow-up post as soon as we can. Technical problems? Email them to us with an exact description of the problem. Make sure to include:
  • Type of computer or mobile device your are using
  • Exact operating system and browser you are viewing the site on (TIP: You can easily determine your operating system here.)